Thornaby-on-Tees, North Yorkshire
MVHR installation in Thornaby-on-Tees
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Thornaby-on-Tees and TS16, TS17 and TS18.
- From £4,175 inc VAT per home
- Free survey
Fitting MVHR in a Thornaby-on-Tees home starts with where the unit can live and how ducts reach each room.
We cover Thornaby-on-Tees and the surrounding TS16, TS17 and TS18 postcodes as part of our work across North Yorkshire. The survey is free for new installations on the UK mainland, and the quote that follows is fixed and in writing.
MVHR in Thornaby-on-Tees at a glance
- Town
- Thornaby-on-Tees, North Yorkshire
- Postcode districts
- TS16, TS17 and TS18
- Nearby
- Stockton-on-Tees (2 miles), Yarm (3 miles) and Billingham (4 miles)
- Price region
- Yorkshire
- Survey
- Free survey (UK mainland)
MVHR for Thornaby-on-Tees homes
A single unit, usually in the loft, a utility cupboard or a garage, runs all the time at a low, quiet speed. Insulated ducts carry extract air from the wet rooms and supply air to the habitable rooms.
Summer bypass and boost controls
Bypass lets cooler night air in without heat recovery; humidity or switch boost for showers and cooking.
Retrofit in an occupied home
Ducts routed through the loft and down through cupboards or boxed corners. Most semis are done in 3 to 5 days.
Guide prices in Thornaby-on-Tees
| Work | Guide price |
|---|---|
| Whole-home MVHR retrofit, 1 to 2 bedroom flat (per home) | £4,175–£6,550 inc VAT |
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £6,050–£8,900 inc VAT |
| Whole-home MVHR retrofit, 4 to 5 bedroom house (per home) | £8,400–£13,100 inc VAT |
Yorkshire rates shown. Prices include VAT at 20%. The fixed price is confirmed in writing after we have seen the job.
Signs it is time to call us
- A new build or extension where the SAP or building control needs a ventilation system
- Stale air or cooking smells that hang around
- Pollen or traffic pollution you want filtered out
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). It sets extract rates for kitchens, bathrooms and utilities and asks for mechanical ventilation to be commissioned and recorded.
Questions from Thornaby-on-Tees
Do you cover Thornaby-on-Tees and nearby?
Yes. We cover Thornaby-on-Tees and nearby places including Stockton-on-Tees, Yarm, Billingham and Middlesbrough. Send your postcode and we will confirm.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
Is MVHR worth it in an older house?
It can be, but the payback is best in a home that is fairly airtight. In a draughty house MVHR still gives steady fresh air and condensation control, but a PIV unit or continuous extract fans may solve the same problem for far less. We will tell you which on survey.
What is the price of MVHR in Thornaby-on-Tees?
Guide prices for Thornaby-on-Tees use Yorkshire rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,175 to £6,550 inc VAT per home. We confirm a fixed price in writing before any work starts.
Is the survey free in Thornaby-on-Tees?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Every MVHR job in Thornaby-on-Tees finishes with a measured commissioning sheet, so you know the system does what it should.
MVHR near Thornaby-on-Tees
More services in Thornaby-on-Tees
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.