Herne Bay, Kent
Extractor fan installation in Herne Bay
Bathroom, kitchen and utility fans sized to the Part F rates, ducted outside and tested. Covering Herne Bay and CT2, CT5 and CT6.
- From £195 inc VAT per fan
- Free survey

Many extractor fans in Herne Bay homes need replacing because they never extracted properly.
Customers in Herne Bay can get a guide price online in a couple of minutes. It uses South East rates, which is what we would charge for the same job anywhere in Kent. The survey is free for new installations on the UK mainland, and the quote that follows is fixed and in writing.
Extractor fans in Herne Bay at a glance
- Town
- Herne Bay, Kent
- Postcode districts
- CT2, CT5 and CT6
- Nearby
- Whitstable (4 miles), Canterbury (7 miles) and Faversham (11 miles)
- Price region
- South East
- Survey
- Free survey (UK mainland)
Extractor fans for Herne Bay homes
Many existing fans were never doing their job: undersized, ducted into the loft space, fitted with a flex duct crushed in the joists, or switched off by occupants because they were noisy. The rate a fan delivers through a real duct run is often far lower than the number on the box, which is why we size to the room and test the result.
Kitchen extract and cooker hoods
A wall or window fan, or a cooker hood ducted outside rather than recirculating.
Like-for-like replacement
A new fan on the existing duct and wiring, often with an overrun timer or humidity sensor.
Guide prices in Herne Bay
| Work | Guide price |
|---|---|
| Like-for-like extractor fan replacement (existing duct and wiring) (per fan) | £195–£325 inc VAT |
| New extractor fan through an outside wall (core drilled, wired, tested) (per fan) | £380–£600 inc VAT |
| New ducted fan to outside through the loft or ceiling (insulated duct, roof or soffit outlet) (per fan) | £490–£825 inc VAT |
Guide prices using South East rates. Prices include VAT at 20%. A guide price is not a quote: we confirm a fixed price in writing first.
Signs it is time to call us
- Mould on the bathroom ceiling or around the window
- The fan runs but a sheet of toilet paper does not stick to the grille
- The fan is noisy, rattling or has stopped
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). For homes, it sets minimum extract rates such as 15 litres a second for a bathroom and 30 or 60 for a kitchen, and expects mechanical systems to be airflow-tested.
Questions from Herne Bay
What area around Herne Bay do you work in?
All of Kent. Near Herne Bay that includes Whitstable, Canterbury, Faversham and Margate.
What size extractor fan does a bathroom need?
In England a bathroom fan should extract at least 15 litres a second, measured at the fan, under Approved Document F. Long or bendy duct runs reduce flow, so the fan often needs to be rated higher than the minimum.
Can an extractor fan vent into the loft?
No. A fan should discharge to outside, because warm, moist air dumped in the loft condenses on the cold roof timbers and causes mould and rot there instead.
Do you cover Herne Bay and nearby?
Yes. We cover Herne Bay and nearby places including Whitstable, Canterbury, Faversham and Margate. Send your postcode and we will confirm.
What is the price of new extractor fans in Herne Bay?
Guide prices for Herne Bay use South East rates: like-for-like extractor fan replacement (existing duct and wiring) is typically £195 to £325 inc VAT per fan. We confirm a fixed price in writing before any work starts.
We can usually fit a replacement fan in Herne Bay in a single short visit.
Extractor fans near Herne Bay
More services in Herne Bay
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.