Home ventilation, Kent
Single-room heat recovery units in Kent
Through-wall heat recovery for one problem room, without ducting the whole house, across Kent.
- From £650 inc VAT per unit
- Free survey

A single-room heat recovery unit is a compact through-wall fan that supplies and extracts air for one room while recovering much of the heat from the outgoing air. It is the answer when one bedroom, kitchen or flat has a condensation problem but whole-home ducting is not practical.
If you are anywhere in Kent, send the postcode and a few photos and we will tell you what we would recommend. Towns we cover include Folkestone, Margate, Ashford, Canterbury and Maidstone.
Single-room heat recovery in Kent at a glance
- Area
- Kent
- Towns listed
- 32, largest Maidstone
- Postcode districts
- ME7, ME1, ME4, TN1, TN2 and CT18
- Price region
- South East
- Survey
- Free survey (UK mainland)
What single-room heat recovery units involves
Some alternate direction every minute or so, storing heat in a ceramic core; others run supply and extract side by side through a small exchanger. Either way, the room gets fresh air without the heat loss of an open window. They are popular in flats, in north-facing bedrooms where mould keeps coming back, and in rooms with no route for ducting.
Single problem room
One unit in the bedroom or kitchen that suffers most.
Paired units in a flat
Two alternating units working together across living spaces.
Kitchen-diner
A higher-rated unit sized for cooking moisture alongside an extract hood.
Guide prices in Kent
| Work | Guide price |
|---|---|
| Single-room heat recovery unit through an outside wall (per unit) | £650–£1,200 inc VAT |
Guide prices using South East rates. Prices include VAT at 20%. A guide price is not a quote: we confirm a fixed price in writing first.
When to get it looked at
- You want fresh air without cold draughts
- Whole-home MVHR is not practical or affordable
- A room with only one outside wall
Rules in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). For homes, it sets minimum extract rates such as 15 litres a second for a bathroom and 30 or 60 for a kitchen, and expects mechanical systems to be airflow-tested.
How the job runs
- Survey
- Quote
- Core and fit
- Wire and set up
- Hand over
Towns we cover in Kent
- Maidstone
- Gillingham
- Chatham
- Royal Tunbridge Wells
- Folkestone
- Margate
- Ashford (Kent)
- Canterbury
- Sittingbourne
- Gravesend
- Dartford
- Ramsgate
- Dover
- Tonbridge
- Strood
- Whitstable
- Deal
- Sevenoaks
- Rochester
- Herne Bay
- Broadstairs
- Faversham
- Swanley
- Longfield
- Hartley
- Swanscombe
- Hythe (Kent)
- Chelsfield
- Sheerness
- Biggin Hill
- Snodland
- St Peter's
Questions about single-room heat recovery units in Kent
Are prices different in Kent?
Our guide prices are adjusted by region. In Kent we use South East rates, so single-room heat recovery unit through an outside wall is typically £650 to £1,200 inc VAT per unit.
Will it work through a cavity wall?
Yes. The sleeve passes through both leaves and the cavity is sealed around it.
How much does a single-room heat recovery unit cost?
A single-room heat recovery unit usually costs £595 to £1,095 including VAT supplied and fitted, depending on the model and the wall.
Is the survey free in Kent?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Which rules apply to ventilation in Kent?
In England, ventilation in new and altered homes is covered by Approved Document F of the Building Regulations. Landlords also have duties under the Housing Health and Safety Rating System, and workplaces must be ventilated under the Workplace (Health, Safety and Welfare) Regulations 1992.
Other services in Kent
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.