Briton Ferry, West Glamorgan
MVHR installation in Briton Ferry
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Briton Ferry and SA7, SA11 and SA12.
- From £4,225 inc VAT per home
- Free survey
For homeowners in Briton Ferry, MVHR is usually part of a bigger job: new windows, insulation, a loft conversion or an extension.
Work in Briton Ferry follows the rules for Wales and finishes with a written record of what was fitted and how it was set up.
MVHR in Briton Ferry at a glance
- Town
- Briton Ferry, West Glamorgan
- Postcode districts
- SA7, SA11 and SA12
- Nearby
- Neath (2 miles), Clydach (5 miles) and Swansea (5 miles)
- Price region
- Wales
- Survey
- Free survey (UK mainland)
What the work involves
Inside the unit the two airflows pass each other across a heat exchanger without mixing, so the incoming fresh air picks up heat from the outgoing air. Filters on both sides keep pollen and dust out of the house and keep the exchanger clean.
Summer bypass and boost controls
Bypass lets cooler night air in without heat recovery; humidity or switch boost for showers and cooking.
Retrofit in an occupied home
Ducts routed through the loft and down through cupboards or boxed corners. Most semis are done in 3 to 5 days.
Guide prices in Briton Ferry
| Work | Guide price |
|---|---|
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £4,700–£7,550 inc VAT |
| Whole-home MVHR retrofit, 1 to 2 bedroom flat (per home) | £4,225–£6,600 inc VAT |
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £6,150–£9,000 inc VAT |
Guide prices using Wales rates. Prices include VAT at 20%. A guide price is not a quote: we confirm a fixed price in writing first.
When to get it looked at
- Condensation on windows every morning in winter
- Mould coming back in bedrooms or bathrooms after cleaning
- You are insulating, re-windowing or making the house more airtight
Rules that apply in Wales
In Wales, ventilation follows the Welsh Approved Document F rather than the English version, with building control checking notifiable work. We design to the Welsh rates and commission mechanical systems so the results can be recorded.
Questions from Briton Ferry
Do you cover Briton Ferry and nearby?
Yes. We cover Briton Ferry and nearby places including Neath, Clydach, Swansea and Maesteg. Send your postcode and we will confirm.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
Is MVHR worth it in an older house?
It can be, but the payback is best in a home that is fairly airtight. In a draughty house MVHR still gives steady fresh air and condensation control, but a PIV unit or continuous extract fans may solve the same problem for far less. We will tell you which on survey.
What is the price of MVHR in Briton Ferry?
Guide prices for Briton Ferry use Wales rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,225 to £6,600 inc VAT per home. We confirm a fixed price in writing before any work starts.
Is the survey free in Briton Ferry?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Every MVHR job in Briton Ferry finishes with a measured commissioning sheet, so you know the system does what it should.
MVHR near Briton Ferry
More services in Briton Ferry
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.