Washington, Tyne and Wear
MVHR installation in Washington
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Washington and DH3, NE37 and NE38.
- From £4,100 inc VAT per home
- Free survey
We survey Washington homes for MVHR before quoting, because the duct routes decide the price more than the unit does.
Whether the property is in the middle of Washington or one of the villages around it, the process is the same: a look at the building, a written price, then fitting and testing on the agreed day.
MVHR in Washington at a glance
- Town
- Washington, Tyne and Wear
- Postcode districts
- DH3, NE37 and NE38
- Nearby
- Chester-le-Street (4 miles), The Boldons (4 miles) and Felling (4 miles)
- Price region
- North East
- Survey
- Free survey (UK mainland)
MVHR for Washington homes
A single unit, usually in the loft, a utility cupboard or a garage, runs all the time at a low, quiet speed. Insulated ducts carry extract air from the wet rooms and supply air to the habitable rooms.
Radial semi-rigid ducting
One small duct per valve from a manifold. Quieter and easier to balance than branched rigid duct in most homes.
Summer bypass and boost controls
Bypass lets cooler night air in without heat recovery; humidity or switch boost for showers and cooking.
Guide prices in Washington
| Work | Guide price |
|---|---|
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £5,950–£8,700 inc VAT |
| Whole-home MVHR retrofit, 4 to 5 bedroom house (per home) | £8,250–£12,850 inc VAT |
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £4,550–£7,300 inc VAT |
North East rates shown. Prices include VAT at 20%. The fixed price is confirmed in writing after we have seen the job.
Common reasons people call
- You are insulating, re-windowing or making the house more airtight
- A new build or extension where the SAP or building control needs a ventilation system
- Stale air or cooking smells that hang around
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). For homes, it sets minimum extract rates such as 15 litres a second for a bathroom and 30 or 60 for a kitchen, and expects mechanical systems to be airflow-tested.
Questions from Washington
What is the price of MVHR in Washington?
Guide prices for Washington use North East rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,100 to £6,400 inc VAT per home. We confirm a fixed price in writing before any work starts.
How noisy is MVHR?
Correctly sized and balanced MVHR is very quiet on normal speed; most people stop noticing it within days. Noise problems usually come from undersized ducts or a unit running flat out, which is why we design the rates first.
Do I keep my trickle vents with MVHR?
No. Under Approved Document F, background ventilators should not be installed with a whole-home MVHR system, so we advise closing or removing them once the system is commissioned.
Is the survey free in Washington?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
How do I get a price for MVHR in Washington?
Use the guide price tool, the form on this page, live chat, WhatsApp or call 0800 088 6341. A postcode and a couple of photos help us give you a useful answer first time.
Ask for a Washington survey slot and we will bring a room-by-room design and a fixed quote.
MVHR near Washington
More services in Washington
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.