Reigate, Surrey
MVHR installation in Reigate
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Reigate and RH1, RH2 and RH3.
- From £4,900 inc VAT per home
- Free survey
MVHR often makes sense in Reigate homes that have recently been insulated, re-windowed or made more airtight.
Whether the property is in the middle of Reigate or one of the villages around it, the process is the same: a look at the building, a written price, then fitting and testing on the agreed day.
MVHR in Reigate at a glance
- Town
- Reigate, Surrey
- Postcode districts
- RH1, RH2 and RH3
- Nearby
- Redhill (2 miles), Horley (5 miles) and Dorking (6 miles)
- Price region
- South East
- Survey
- Free survey (UK mainland)
MVHR for Reigate homes
Filters on both sides keep pollen and dust out of the house and keep the exchanger clean. MVHR works best in a home that is reasonably airtight: a new build, a deep retrofit with insulation and new windows, or a renovation where ceilings are coming down anyway.
Radial semi-rigid ducting
One small duct per valve from a manifold. Quieter and easier to balance than branched rigid duct in most homes.
Summer bypass and boost controls
Bypass lets cooler night air in without heat recovery; humidity or switch boost for showers and cooking.
Guide prices in Reigate
| Work | Guide price |
|---|---|
| Whole-home MVHR retrofit, 4 to 5 bedroom house (per home) | £9,850–£15,350 inc VAT |
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £5,450–£8,750 inc VAT |
| Whole-home MVHR retrofit, 1 to 2 bedroom flat (per home) | £4,900–£7,650 inc VAT |
These ranges use our South East rates. Prices include VAT at 20%. You get a fixed written price before any work is booked.
When to get it looked at
- A new build or extension where the SAP or building control needs a ventilation system
- Stale air or cooking smells that hang around
- Pollen or traffic pollution you want filtered out
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). It sets extract rates for kitchens, bathrooms and utilities and asks for mechanical ventilation to be commissioned and recorded.
Questions from Reigate
Do you cover Reigate and nearby?
Yes. We cover Reigate and nearby places including Redhill, Horley, Dorking and Banstead. Send your postcode and we will confirm.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
Is MVHR worth it in an older house?
It can be, but the payback is best in a home that is fairly airtight. In a draughty house MVHR still gives steady fresh air and condensation control, but a PIV unit or continuous extract fans may solve the same problem for far less. We will tell you which on survey.
What is the price of MVHR in Reigate?
Guide prices for Reigate use South East rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,900 to £7,650 inc VAT per home. We confirm a fixed price in writing before any work starts.
Is the survey free in Reigate?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Every MVHR job in Reigate finishes with a measured commissioning sheet, so you know the system does what it should.
MVHR near Reigate
More services in Reigate
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.