Erskine, Renfrewshire and Inverclyde
MVHR installation in Erskine
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Erskine and G60, G81 and PA8.
- From £4,275 inc VAT per home
- Free survey
MVHR in Erskine works the same way as anywhere else: a quiet unit, a duct to every room and a proper airflow test at the end.
Customers in Erskine can get a guide price online in a couple of minutes. It uses Scotland rates, which is what we would charge for the same job anywhere in Renfrewshire and Inverclyde. We survey first, free of charge for new installations on the mainland, then send a fixed written quote.
MVHR in Erskine at a glance
- Town
- Erskine, Renfrewshire and Inverclyde
- Postcode districts
- G60, G81 and PA8
- Nearby
- Clydebank (2 miles), Renfrew (3 miles) and Bearsden (5 miles)
- Price region
- Scotland
- Survey
- Free survey (UK mainland)
MVHR for Erskine homes
Filters on both sides keep pollen and dust out of the house and keep the exchanger clean. MVHR works best in a home that is reasonably airtight: a new build, a deep retrofit with insulation and new windows, or a renovation where ceilings are coming down anyway.
New build or full renovation
Ducts go in at first fix before plasterboard, which is the cheapest and neatest time to fit MVHR.
Radial semi-rigid ducting
One small duct per valve from a manifold. Quieter and easier to balance than branched rigid duct in most homes.
Guide prices in Erskine
| Work | Guide price |
|---|---|
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £4,750–£7,650 inc VAT |
| Whole-home MVHR retrofit, 1 to 2 bedroom flat (per home) | £4,275–£6,650 inc VAT |
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £6,200–£9,050 inc VAT |
Scotland rates shown. Prices include VAT at 20%. The fixed price is confirmed in writing after we have seen the job.
Common reasons people call
- Mould coming back in bedrooms or bathrooms after cleaning
- You are insulating, re-windowing or making the house more airtight
- A new build or extension where the SAP or building control needs a ventilation system
Rules that apply in Scotland
Scottish projects follow the Technical Handbooks (section 3, Environment) under the Building (Scotland) Regulations, usually with a building warrant. We work to the Scottish ventilation standards and record the airflow achieved.
Questions from Erskine
Do you cover Erskine and nearby?
Yes. We cover Erskine and nearby places including Clydebank, Renfrew, Bearsden and Paisley. Send your postcode and we will confirm.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
Is MVHR worth it in an older house?
It can be, but the payback is best in a home that is fairly airtight. In a draughty house MVHR still gives steady fresh air and condensation control, but a PIV unit or continuous extract fans may solve the same problem for far less. We will tell you which on survey.
What is the price of MVHR in Erskine?
Guide prices for Erskine use Scotland rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,275 to £6,650 inc VAT per home. We confirm a fixed price in writing before any work starts.
Is the survey free in Erskine?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Get a guide price online in two minutes, then book a free survey anywhere in Erskine.
MVHR near Erskine
More services in Erskine
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.