Birkenhead, Merseyside
MVHR installation in Birkenhead
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Birkenhead and CH41, CH42, CH43 and CH46.
- From £4,225 inc VAT per home
- Free survey
Fitting MVHR in a Birkenhead home starts with where the unit can live and how ducts reach each room.
Customers in Birkenhead can get a guide price online in a couple of minutes. It uses North West rates, which is what we would charge for the same job anywhere in Merseyside. The survey is free for new installations on the UK mainland, and the quote that follows is fixed and in writing.
MVHR in Birkenhead at a glance
- Town
- Birkenhead, Merseyside
- Postcode districts
- CH41, CH42, CH43, CH46 and CH49
- Nearby
- Liverpool (2 miles), Prenton (2 miles) and Dingle (2 miles)
- Price region
- North West
- Survey
- Free survey (UK mainland)
MVHR for Birkenhead homes
A single unit, usually in the loft, a utility cupboard or a garage, runs all the time at a low, quiet speed. Insulated ducts carry extract air from the wet rooms and supply air to the habitable rooms.
New build or full renovation
Ducts go in at first fix before plasterboard, which is the cheapest and neatest time to fit MVHR.
Radial semi-rigid ducting
One small duct per valve from a manifold. Quieter and easier to balance than branched rigid duct in most homes.
Guide prices in Birkenhead
| Work | Guide price |
|---|---|
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £6,150–£9,000 inc VAT |
| Whole-home MVHR retrofit, 4 to 5 bedroom house (per home) | £8,500–£13,250 inc VAT |
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £4,700–£7,550 inc VAT |
These ranges use our North West rates. Prices include VAT at 20%. You get a fixed written price before any work is booked.
Signs it is time to call us
- You are insulating, re-windowing or making the house more airtight
- A new build or extension where the SAP or building control needs a ventilation system
- Stale air or cooking smells that hang around
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). For homes, it sets minimum extract rates such as 15 litres a second for a bathroom and 30 or 60 for a kitchen, and expects mechanical systems to be airflow-tested.
Questions from Birkenhead
What is the price of MVHR in Birkenhead?
Guide prices for Birkenhead use North West rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,225 to £6,600 inc VAT per home. We confirm a fixed price in writing before any work starts.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
Is MVHR worth it in an older house?
It can be, but the payback is best in a home that is fairly airtight. In a draughty house MVHR still gives steady fresh air and condensation control, but a PIV unit or continuous extract fans may solve the same problem for far less. We will tell you which on survey.
Is the survey free in Birkenhead?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
How do I get a price for MVHR in Birkenhead?
Use the guide price tool, the form on this page, live chat, WhatsApp or call 0800 088 6341. A postcode and a couple of photos help us give you a useful answer first time.
Send us a floor plan or a few photos of the loft and we can give a first price for your Birkenhead home before we visit.
MVHR near Birkenhead
More services in Birkenhead
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.