Barking, Greater London
MVHR installation in Barking
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Barking and IG11, RM6, RM8 and RM9.
- From £5,350 inc VAT per home
- Free survey
Fitting MVHR in a Barking home starts with where the unit can live and how ducts reach each room.
Work in Barking follows the rules for England and finishes with a written record of what was fitted and how it was set up.
MVHR in Barking at a glance
- Town
- Barking, Greater London
- Postcode districts
- IG11, RM6, RM8, RM9 and RM10
- Nearby
- Ilford (2 miles), Manor Park (2 miles) and Goodmayes (2 miles)
- Price region
- London
- Survey
- Free survey (UK mainland)
What the work involves
Inside the unit the two airflows pass each other across a heat exchanger without mixing, so the incoming fresh air picks up heat from the outgoing air. Filters on both sides keep pollen and dust out of the house and keep the exchanger clean.
New build or full renovation
Ducts go in at first fix before plasterboard, which is the cheapest and neatest time to fit MVHR.
Radial semi-rigid ducting
One small duct per valve from a manifold. Quieter and easier to balance than branched rigid duct in most homes.
Guide prices in Barking
| Work | Guide price |
|---|---|
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £7,750–£11,350 inc VAT |
| Whole-home MVHR retrofit, 4 to 5 bedroom house (per home) | £10,750–£16,750 inc VAT |
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £5,950–£9,550 inc VAT |
Guide prices using London rates. Prices include VAT at 20%. A guide price is not a quote: we confirm a fixed price in writing first.
Signs it is time to call us
- Mould coming back in bedrooms or bathrooms after cleaning
- You are insulating, re-windowing or making the house more airtight
- A new build or extension where the SAP or building control needs a ventilation system
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). It sets extract rates for kitchens, bathrooms and utilities and asks for mechanical ventilation to be commissioned and recorded.
Questions from Barking
What area around Barking do you work in?
All of Greater London. Near Barking that includes Ilford, Manor Park, Goodmayes and Becontree.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
Is MVHR worth it in an older house?
It can be, but the payback is best in a home that is fairly airtight. In a draughty house MVHR still gives steady fresh air and condensation control, but a PIV unit or continuous extract fans may solve the same problem for far less. We will tell you which on survey.
Do you cover Barking and nearby?
Yes. We cover Barking and nearby places including Ilford, Manor Park, Goodmayes and Becontree. Send your postcode and we will confirm.
What is the price of MVHR in Barking?
Guide prices for Barking use London rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £5,350 to £8,350 inc VAT per home. We confirm a fixed price in writing before any work starts.
Get a guide price online in two minutes, then book a free survey anywhere in Barking.
MVHR near Barking
More services in Barking
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.