Walton-on-the-Naze, Essex
MVHR installation in Walton-on-the-Naze
Whole-home heat recovery ventilation, designed room by room and airflow-tested at handover. Covering Walton-on-the-Naze and CO12, CO13 and CO14.
- From £4,675 inc VAT per home
- Free survey
MVHR in Walton-on-the-Naze works the same way as anywhere else: a quiet unit, a duct to every room and a proper airflow test at the end.
For MVHR installation in Walton-on-the-Naze, send us the postcode, a few photos and a rough idea of the rooms involved. We will tell you what we would fit and roughly what it costs before arranging a visit.
MVHR in Walton-on-the-Naze at a glance
- Town
- Walton-on-the-Naze, Essex
- Postcode districts
- CO12, CO13 and CO14
- Nearby
- Frinton-on-Sea (2 miles), Clacton-on-Sea (6 miles) and Harwich (6 miles)
- Price region
- East of England
- Survey
- Free survey (UK mainland)
MVHR for Walton-on-the-Naze homes
Filters on both sides keep pollen and dust out of the house and keep the exchanger clean. MVHR works best in a home that is reasonably airtight: a new build, a deep retrofit with insulation and new windows, or a renovation where ceilings are coming down anyway.
Summer bypass and boost controls
Bypass lets cooler night air in without heat recovery; humidity or switch boost for showers and cooking.
Retrofit in an occupied home
Ducts routed through the loft and down through cupboards or boxed corners. Most semis are done in 3 to 5 days.
Guide prices in Walton-on-the-Naze
| Work | Guide price |
|---|---|
| Whole-home MVHR retrofit, 3 bedroom house (per home) | £6,750–£9,900 inc VAT |
| Whole-home MVHR retrofit, 4 to 5 bedroom house (per home) | £9,400–£14,650 inc VAT |
| MVHR in a new build or full renovation (fitted at first fix), 3 to 4 bedrooms (per home) | £5,200–£8,350 inc VAT |
East of England rates shown. Prices include VAT at 20%. The fixed price is confirmed in writing after we have seen the job.
Common reasons people call
- A new build or extension where the SAP or building control needs a ventilation system
- Stale air or cooking smells that hang around
- Pollen or traffic pollution you want filtered out
Rules that apply in England
English building work follows Approved Document F (2021 edition) for ventilation rates, installation and commissioning. For homes, it sets minimum extract rates such as 15 litres a second for a bathroom and 30 or 60 for a kitchen, and expects mechanical systems to be airflow-tested.
Questions from Walton-on-the-Naze
Do you cover Walton-on-the-Naze and nearby?
Yes. We cover Walton-on-the-Naze and nearby places including Frinton-on-Sea, Clacton-on-Sea, Harwich and Felixstowe. Send your postcode and we will confirm.
Can MVHR cool the house in summer?
MVHR is not air conditioning, but a summer bypass lets cooler night air in without warming it, which helps take the edge off hot rooms. For real cooling you would need a separate system.
How much does MVHR cost to install?
A typical retrofit costs £6,450 to £9,450 including VAT for a three-bedroom house, and £4,950 to £7,950 when it goes in during a new build or full renovation. Flats start lower and large detached homes cost more because of the duct runs. We give a fixed price after the survey.
What is the price of MVHR in Walton-on-the-Naze?
Guide prices for Walton-on-the-Naze use East of England rates: whole-home MVHR retrofit, 1 to 2 bedroom flat is typically £4,675 to £7,300 inc VAT per home. We confirm a fixed price in writing before any work starts.
Is the survey free in Walton-on-the-Naze?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Ask for a Walton-on-the-Naze survey slot and we will bring a room-by-room design and a fixed quote.
MVHR near Walton-on-the-Naze
More services in Walton-on-the-Naze
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.