Pinner, Greater London
Extractor fan installation in Pinner
Bathroom, kitchen and utility fans sized to the Part F rates, ducted outside and tested. Covering Pinner and HA2, HA5 and HA6.
- From £210 inc VAT per fan
- Free survey

Many extractor fans in Pinner homes need replacing because they never extracted properly.
Customers in Pinner can get a guide price online in a couple of minutes. It uses London rates, which is what we would charge for the same job anywhere in Greater London. The survey is free for new installations on the UK mainland, and the quote that follows is fixed and in writing.
Extractor fans in Pinner at a glance
- Town
- Pinner, Greater London
- Postcode districts
- HA2, HA5 and HA6
- Nearby
- Northwood Hills (1 mile), Headstone (2 miles) and Wealdstone (2 miles)
- Price region
- London
- Survey
- Free survey (UK mainland)
How we approach extractor fans in Pinner
The rate a fan delivers through a real duct run is often far lower than the number on the box, which is why we size to the room and test the result. For England, Approved Document F gives minimum intermittent extract rates: 15 litres a second for a bathroom, 30 for a kitchen with a cooker hood (60 without one), 30 for a utility room and 6 for a WC.
New fan through an outside wall
Core drilled, sleeved, wired from a fused spur and sealed outside.
Ducted to outside through the loft
Insulated duct to a roof, ridge or soffit outlet so warm moist air does not condense in the loft.
Guide prices in Pinner
| Work | Guide price |
|---|---|
| Kitchen extract fan, or cooker hood ducted to outside (per kitchen) | £475–£825 inc VAT |
| Like-for-like extractor fan replacement (existing duct and wiring) (per fan) | £210–£355 inc VAT |
| New extractor fan through an outside wall (core drilled, wired, tested) (per fan) | £415–£650 inc VAT |
London rates shown. Prices include VAT at 20%. The fixed price is confirmed in writing after we have seen the job.
Signs it is time to call us
- Mirror still steamed up 20 minutes after a shower
- Mould on the bathroom ceiling or around the window
- The fan runs but a sheet of toilet paper does not stick to the grille
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). For homes, it sets minimum extract rates such as 15 litres a second for a bathroom and 30 or 60 for a kitchen, and expects mechanical systems to be airflow-tested.
Questions from Pinner
Do you cover Pinner and nearby?
Yes. We cover Pinner and nearby places including Northwood Hills, Headstone, Wealdstone and Ruislip Manor. Send your postcode and we will confirm.
How much does it cost to fit an extractor fan?
Replacing a fan on an existing duct usually costs £175 to £295 including VAT. A new fan through an outside wall is typically £345 to £545, and a fan ducted to outside through the loft £445 to £745.
What size extractor fan does a bathroom need?
In England a bathroom fan should extract at least 15 litres a second, measured at the fan, under Approved Document F. Long or bendy duct runs reduce flow, so the fan often needs to be rated higher than the minimum.
What is the price of new extractor fans in Pinner?
Guide prices for Pinner use London rates: like-for-like extractor fan replacement (existing duct and wiring) is typically £210 to £355 inc VAT per fan. We confirm a fixed price in writing before any work starts.
Is the survey free in Pinner?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Send a photo of the existing fan and the outside wall and we will price your Pinner job quickly.
Extractor fans near Pinner
More services in Pinner
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.