Commercial ventilation, Worcestershire
Ductwork installation in Worcestershire
Spiral and rectangular galvanised ductwork, hung, insulated and sealed, across Worcestershire.
- From £45 + VAT per metre
- Free survey
Ductwork carries air between the fan or unit and the rooms it serves, and how it is sized, hung and sealed decides how well the whole system performs. We supply and install spiral and rectangular galvanised ductwork, fittings, dampers, insulation and access panels.
If you are anywhere in Worcestershire, send the postcode and a few photos and we will tell you what we would recommend. Towns we cover include Redditch, Kidderminster, Great Malvern, Bromsgrove and Evesham.
Ductwork in Worcestershire at a glance
- Area
- Worcestershire
- Towns listed
- 8, largest Worcester
- Postcode districts
- WR2, B96, B97, DY10, DY11 and WR8
- Price region
- West Midlands
- Survey
- Free survey (UK mainland)
How we do it
Undersized or leaky ductwork forces fans to work harder and makes systems noisy. We work to recognised sheet-metal ductwork specifications, seal joints, fit access panels for cleaning and insulate ducts that run through cold spaces or carry cold air. We install for our own ventilation systems and for other contractors, from short runs in a shop to full warehouse and office distribution.
Rectangular ductwork
For larger volumes or limited ceiling depth.
Insulation and fire dampers
Thermal insulation and dampers where ducts pass through compartments, as designed.
Access panels
Fitted for future cleaning and inspection.
Guide prices in Worcestershire
| Work | Guide price |
|---|---|
| Spiral ductwork supplied and installed (up to 315 mm diameter) (per metre) | £45–£95 + VAT |
| Rectangular ductwork supplied and installed, insulated where needed (per metre) | £95–£225 + VAT |
West Midlands rates shown. Prices exclude VAT. The fixed price is confirmed in writing after we have seen the job.
When to get it looked at
- No access panels for cleaning
- Uninsulated ducts dripping condensation
- A new system needs distribution ductwork
Rules in England
English building work follows Approved Document F (2021 edition) for ventilation rates, installation and commissioning. Workplaces must also be ventilated with a sufficient quantity of fresh or purified air under the Workplace (Health, Safety and Welfare) Regulations 1992.
How the job runs
- Survey
- Drawings
- Install
- Insulate
- Test
Towns we cover in Worcestershire
Questions about ductwork installation in Worcestershire
Which towns in Worcestershire do you cover?
All of Worcestershire, including Redditch, Kidderminster, Great Malvern, Bromsgrove and Evesham. If your town is not listed, send the postcode and we will confirm.
How much does ductwork installation cost?
Spiral ductwork up to 315 mm typically costs £45 to £95 per metre and rectangular ductwork £95 to £225 per metre excluding VAT, supplied and installed, depending on size and height.
Spiral or rectangular duct?
Spiral duct is quicker to install and leaks less; rectangular duct fits shallow ceiling voids and larger airflows.
Are prices different in Worcestershire?
Our guide prices are adjusted by region. In Worcestershire we use West Midlands rates, so spiral ductwork supplied and installed (up to 315 mm diameter) is typically £45 to £95 + VAT per metre.
Is the survey free in Worcestershire?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Worcestershire
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.