Commercial ventilation, Tayside
Ductwork installation in Tayside
Spiral and rectangular galvanised ductwork, hung, insulated and sealed, across Tayside.
- From £45 + VAT per metre
- Free survey
Ductwork carries air between the fan or unit and the rooms it serves, and how it is sized, hung and sealed decides how well the whole system performs. We supply and install spiral and rectangular galvanised ductwork, fittings, dampers, insulation and access panels.
Every job in Tayside gets a written quote before it starts and a commissioning record when it finishes. We cover Carnoustie, Dundee, Perth, Arbroath and Forfar and the villages around them.
Ductwork in Tayside at a glance
- Area
- Tayside, Scotland
- Towns listed
- 6, largest Dundee
- Postcode districts
- PH2, DD11, DD8, DD10, DD7 and DD1
- Price region
- Scotland
- Survey
- Free survey (UK mainland)
How we do it
Undersized or leaky ductwork forces fans to work harder and makes systems noisy. We work to recognised sheet-metal ductwork specifications, seal joints, fit access panels for cleaning and insulate ducts that run through cold spaces or carry cold air. We install for our own ventilation systems and for other contractors, from short runs in a shop to full warehouse and office distribution.
Access panels
Fitted for future cleaning and inspection.
Spiral ductwork
Round galvanised ductwork for supply and extract runs.
Rectangular ductwork
For larger volumes or limited ceiling depth.
Guide prices in Tayside
| Work | Guide price |
|---|---|
| Spiral ductwork supplied and installed (up to 315 mm diameter) (per metre) | £45–£90 + VAT |
| Rectangular ductwork supplied and installed, insulated where needed (per metre) | £90–£215 + VAT |
Scotland rates shown. Prices exclude VAT. The fixed price is confirmed in writing after we have seen the job.
Common reasons people call
- A layout change needs ducts moved
- Noise from undersized ducts
- No access panels for cleaning
Rules in Scotland
Scottish projects follow the Technical Handbooks (section 3, Environment) under the Building (Scotland) Regulations, usually with a building warrant. Scottish employers also have the Workplace Regulations 1992 duty to provide effective ventilation.
How the job runs
- Survey
- Drawings
- Install
- Insulate
- Test
Towns we cover in Tayside
Questions about ductwork installation in Tayside
Which towns in Tayside do you cover?
All of Tayside, including Carnoustie, Dundee, Perth, Arbroath and Forfar. If your town is not listed, send the postcode and we will confirm.
Will you fit access panels?
Yes. Access panels make future cleaning and inspection possible.
How much does ductwork installation cost?
Spiral ductwork up to 315 mm typically costs £45 to £95 per metre and rectangular ductwork £95 to £225 per metre excluding VAT, supplied and installed, depending on size and height.
Are prices different in Tayside?
Our guide prices are adjusted by region. In Tayside we use Scotland rates, so spiral ductwork supplied and installed (up to 315 mm diameter) is typically £45 to £90 + VAT per metre.
Is the survey free in Tayside?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Tayside
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.