Commercial ventilation, Shropshire
Ductwork installation in Shropshire
Spiral and rectangular galvanised ductwork, hung, insulated and sealed, across Shropshire.
- From £45 + VAT per metre
- Free survey
Ductwork carries air between the fan or unit and the rooms it serves, and how it is sized, hung and sealed decides how well the whole system performs. We supply and install spiral and rectangular galvanised ductwork, fittings, dampers, insulation and access panels.
Every job in Shropshire gets a written quote before it starts and a commissioning record when it finishes. We cover Ryton, Hadley, Newport, Telford and Shrewsbury and the villages around them.
Ductwork in Shropshire at a glance
- Area
- Shropshire
- Towns listed
- 12, largest Telford
- Postcode districts
- TF11, TF1, TF2, ST20, TF2 and TF12
- Price region
- West Midlands
- Survey
- Free survey (UK mainland)
What the work involves
Undersized or leaky ductwork forces fans to work harder and makes systems noisy. We work to recognised sheet-metal ductwork specifications, seal joints, fit access panels for cleaning and insulate ducts that run through cold spaces or carry cold air. We install for our own ventilation systems and for other contractors, from short runs in a shop to full warehouse and office distribution.
Rectangular ductwork
For larger volumes or limited ceiling depth.
Insulation and fire dampers
Thermal insulation and dampers where ducts pass through compartments, as designed.
Access panels
Fitted for future cleaning and inspection.
Guide prices in Shropshire
| Work | Guide price |
|---|---|
| Spiral ductwork supplied and installed (up to 315 mm diameter) (per metre) | £45–£95 + VAT |
| Rectangular ductwork supplied and installed, insulated where needed (per metre) | £95–£225 + VAT |
These ranges use our West Midlands rates. Prices exclude VAT. You get a fixed written price before any work is booked.
Common reasons people call
- A new system needs distribution ductwork
- Existing ducts are leaking or damaged
- A layout change needs ducts moved
Rules in England
English building work follows Approved Document F (2021 edition) for ventilation rates, installation and commissioning. Workplaces must also be ventilated with a sufficient quantity of fresh or purified air under the Workplace (Health, Safety and Welfare) Regulations 1992.
How the job runs
- Survey
- Drawings
- Install
- Insulate
- Test
Towns we cover in Shropshire
- Telford
- Shrewsbury
- Loughton
- Wellington
- Oswestry
- Ryton
- Hadley
- Newport (Shropshire)
- Bridgnorth
- Market Drayton
- Ludlow
- Whitchurch (Shropshire)
Questions about ductwork installation in Shropshire
Which towns in Shropshire do you cover?
All of Shropshire, including Ryton, Hadley, Newport, Telford and Shrewsbury. If your town is not listed, send the postcode and we will confirm.
How much does ductwork installation cost?
Spiral ductwork up to 315 mm typically costs £45 to £95 per metre and rectangular ductwork £95 to £225 per metre excluding VAT, supplied and installed, depending on size and height.
Spiral or rectangular duct?
Spiral duct is quicker to install and leaks less; rectangular duct fits shallow ceiling voids and larger airflows.
Are prices different in Shropshire?
Our guide prices are adjusted by region. In Shropshire we use West Midlands rates, so spiral ductwork supplied and installed (up to 315 mm diameter) is typically £45 to £95 + VAT per metre.
Is the survey free in Shropshire?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Shropshire
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.