Commercial ventilation, Renfrewshire and Inverclyde
Ductwork installation in Renfrewshire and Inverclyde
Spiral and rectangular galvanised ductwork, hung, insulated and sealed, across Renfrewshire and Inverclyde.
- From £45 + VAT per metre
- Free survey
Ductwork carries air between the fan or unit and the rooms it serves, and how it is sized, hung and sealed decides how well the whole system performs. We supply and install spiral and rectangular galvanised ductwork, fittings, dampers, insulation and access panels.
Renfrewshire and Inverclyde has every kind of building, from old terraces to new estates and business parks, and every job is designed around the building in front of us, not a standard kit.
Ductwork in Renfrewshire and Inverclyde at a glance
- Area
- Renfrewshire and Inverclyde, Scotland
- Towns listed
- 10, largest Paisley
- Postcode districts
- PA5, PA9, G60, G81, PA13 and PA14
- Price region
- Scotland
- Survey
- Free survey (UK mainland)
How we do it
Undersized or leaky ductwork forces fans to work harder and makes systems noisy. We work to recognised sheet-metal ductwork specifications, seal joints, fit access panels for cleaning and insulate ducts that run through cold spaces or carry cold air. We install for our own ventilation systems and for other contractors, from short runs in a shop to full warehouse and office distribution.
Insulation and fire dampers
Thermal insulation and dampers where ducts pass through compartments, as designed.
Access panels
Fitted for future cleaning and inspection.
Spiral ductwork
Round galvanised ductwork for supply and extract runs.
Guide prices in Renfrewshire and Inverclyde
| Work | Guide price |
|---|---|
| Spiral ductwork supplied and installed (up to 315 mm diameter) (per metre) | £45–£90 + VAT |
| Rectangular ductwork supplied and installed, insulated where needed (per metre) | £90–£215 + VAT |
Scotland rates shown. Prices exclude VAT. The fixed price is confirmed in writing after we have seen the job.
Common reasons people call
- A new system needs distribution ductwork
- Existing ducts are leaking or damaged
- A layout change needs ducts moved
Rules in Scotland
In Scotland, ventilation is covered by the Building (Scotland) Regulations and section 3 of the Technical Handbooks, and most building work needs a building warrant first. Scottish employers also have the Workplace Regulations 1992 duty to provide effective ventilation.
How the job runs
- Survey
- Drawings
- Install
- Insulate
- Test
Towns we cover in Renfrewshire and Inverclyde
Questions about ductwork installation in Renfrewshire and Inverclyde
Which towns in Renfrewshire and Inverclyde do you cover?
All of Renfrewshire and Inverclyde, including Erskine, Port Glasgow, Paisley, Greenock and Newton Mearns. If your town is not listed, send the postcode and we will confirm.
Do ducts need insulation?
Ducts carrying cold or warm air through unheated spaces usually need insulation to prevent heat loss and condensation.
Do you fit fire dampers?
We fit fire dampers where the design requires them; their selection and testing follow the fire strategy for the building.
Are prices different in Renfrewshire and Inverclyde?
Our guide prices are adjusted by region. In Renfrewshire and Inverclyde we use Scotland rates, so spiral ductwork supplied and installed (up to 315 mm diameter) is typically £45 to £90 + VAT per metre.
Is the survey free in Renfrewshire and Inverclyde?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Renfrewshire and Inverclyde
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.