Commercial ventilation, Mid Glamorgan
Ductwork installation in Mid Glamorgan
Spiral and rectangular galvanised ductwork, hung, insulated and sealed, across Mid Glamorgan.
- From £45 + VAT per metre
- Free survey
Ductwork carries air between the fan or unit and the rooms it serves, and how it is sized, hung and sealed decides how well the whole system performs. We supply and install spiral and rectangular galvanised ductwork, fittings, dampers, insulation and access panels.
Across Mid Glamorgan the job is priced the same way wherever you are: what is fitted, how long it takes and how far we travel. Towns we cover include Aberdare, Maesteg, Rhondda, Tonypandy and Bridgend.
Ductwork in Mid Glamorgan at a glance
- Area
- Mid Glamorgan, Wales
- Towns listed
- 14, largest Rhondda
- Postcode districts
- CF31, CF32, CF40, CF41, CF39 and CF40
- Price region
- Wales
- Survey
- Free survey (UK mainland)
What ductwork installation involves
Undersized or leaky ductwork forces fans to work harder and makes systems noisy. We work to recognised sheet-metal ductwork specifications, seal joints, fit access panels for cleaning and insulate ducts that run through cold spaces or carry cold air. We install for our own ventilation systems and for other contractors, from short runs in a shop to full warehouse and office distribution.
Insulation and fire dampers
Thermal insulation and dampers where ducts pass through compartments, as designed.
Access panels
Fitted for future cleaning and inspection.
Spiral ductwork
Round galvanised ductwork for supply and extract runs.
Guide prices in Mid Glamorgan
| Work | Guide price |
|---|---|
| Spiral ductwork supplied and installed (up to 315 mm diameter) (per metre) | £45–£90 + VAT |
| Rectangular ductwork supplied and installed, insulated where needed (per metre) | £90–£215 + VAT |
Guide prices using Wales rates. Prices exclude VAT. A guide price is not a quote: we confirm a fixed price in writing first.
When to get it looked at
- Noise from undersized ducts
- No access panels for cleaning
- Uninsulated ducts dripping condensation
Rules in Wales
Wales has its own Part F ventilation guidance, published by the Welsh Government, and work is checked by building control. Employers in Wales also have the Workplace Regulations 1992 duty to ventilate enclosed workplaces.
How the job runs
- Survey
- Drawings
- Install
- Insulate
- Test
Towns we cover in Mid Glamorgan
- Rhondda
- Tonypandy
- Bridgend
- Merthyr Tydfil
- Coity
- Pontypridd
- Aberdare
- Maesteg
- Porthcawl
- Llantrisant
- Pyle
- Treharris
- Mountain Ash
- Aberkenfig
Questions about ductwork installation in Mid Glamorgan
Which rules apply to ventilation in Mid Glamorgan?
In Wales, the Welsh Government's own Approved Document F (2022 edition) applies to ventilation in homes, with a new edition taking effect on 4 March 2027. Rented homes must be fit for human habitation under the Renting Homes (Wales) Act 2016, and workplaces must be ventilated under the Workplace (Health, Safety and Welfare) Regulations 1992.
Spiral or rectangular duct?
Spiral duct is quicker to install and leaks less; rectangular duct fits shallow ceiling voids and larger airflows.
Do ducts need insulation?
Ducts carrying cold or warm air through unheated spaces usually need insulation to prevent heat loss and condensation.
Which towns in Mid Glamorgan do you cover?
All of Mid Glamorgan, including Aberdare, Maesteg, Rhondda, Tonypandy and Bridgend. If your town is not listed, send the postcode and we will confirm.
Are prices different in Mid Glamorgan?
Our guide prices are adjusted by region. In Mid Glamorgan we use Wales rates, so spiral ductwork supplied and installed (up to 315 mm diameter) is typically £45 to £90 + VAT per metre.
Other services in Mid Glamorgan
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.