Commercial ventilation, Lancashire
Ductwork installation in Lancashire
Spiral and rectangular galvanised ductwork, hung, insulated and sealed, across Lancashire.
- From £45 + VAT per metre
- Free survey
Ductwork carries air between the fan or unit and the rooms it serves, and how it is sized, hung and sealed decides how well the whole system performs. We supply and install spiral and rectangular galvanised ductwork, fittings, dampers, insulation and access panels.
If you are anywhere in Lancashire, send the postcode and a few photos and we will tell you what we would recommend. Towns we cover include Lancaster, Lytham St Annes, Preston, Burnley and Blackburn.
Ductwork in Lancashire at a glance
- Area
- Lancashire
- Towns listed
- 29, largest Preston
- Postcode districts
- PR5, PR25, BB1, BB5, PR6 and PR7
- Price region
- North West
- Survey
- Free survey (UK mainland)
How we do it
Undersized or leaky ductwork forces fans to work harder and makes systems noisy. We work to recognised sheet-metal ductwork specifications, seal joints, fit access panels for cleaning and insulate ducts that run through cold spaces or carry cold air. We install for our own ventilation systems and for other contractors, from short runs in a shop to full warehouse and office distribution.
Access panels
Fitted for future cleaning and inspection.
Spiral ductwork
Round galvanised ductwork for supply and extract runs.
Rectangular ductwork
For larger volumes or limited ceiling depth.
Guide prices in Lancashire
| Work | Guide price |
|---|---|
| Spiral ductwork supplied and installed (up to 315 mm diameter) (per metre) | £45–£90 + VAT |
| Rectangular ductwork supplied and installed, insulated where needed (per metre) | £90–£215 + VAT |
North West rates shown. Prices exclude VAT. The fixed price is confirmed in writing after we have seen the job.
Signs it is time to call us
- A new system needs distribution ductwork
- Existing ducts are leaking or damaged
- A layout change needs ducts moved
Rules in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). Employers have a separate duty under the Workplace Regulations 1992 to provide effective and suitable ventilation.
How the job runs
- Survey
- Drawings
- Install
- Insulate
- Test
Towns we cover in Lancashire
- Preston
- Burnley
- Blackburn
- Blackpool
- Rossendale
- Morecambe
- Lancaster
- Lytham St Annes
- Skelmersdale
- Leyland
- Accrington
- Chorley
- Darwen
- Nelson (Lancashire)
- Fleetwood
- Ormskirk
- Rawtenstall
- Colne
- Poulton-le-Fylde
- Heysham
- Haslingden
- Cleveleys
- Clitheroe
- Clayton-le-Woods
- Bacup
- Great Harwood
- Padiham
- Barnoldswick
- Brierfield
Questions about ductwork installation in Lancashire
Which towns in Lancashire do you cover?
All of Lancashire, including Lancaster, Lytham St Annes, Preston, Burnley and Blackburn. If your town is not listed, send the postcode and we will confirm.
How much does ductwork installation cost?
Spiral ductwork up to 315 mm typically costs £45 to £95 per metre and rectangular ductwork £95 to £225 per metre excluding VAT, supplied and installed, depending on size and height.
Spiral or rectangular duct?
Spiral duct is quicker to install and leaks less; rectangular duct fits shallow ceiling voids and larger airflows.
Are prices different in Lancashire?
Our guide prices are adjusted by region. In Lancashire we use North West rates, so spiral ductwork supplied and installed (up to 315 mm diameter) is typically £45 to £90 + VAT per metre.
Is the survey free in Lancashire?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Lancashire
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.