Denton, Greater Manchester
Commercial ventilation design and installation in Denton
Supply and extract with heat recovery for offices, shops, clinics and fit-outs. Covering Denton and M34, SK5 and SK16.
- From £7,550 + VAT per system
- Free survey
A change of use in Denton often needs a fresh ventilation design, which we can provide.
Whether the property is in the middle of Denton or one of the villages around it, the process is the same: a look at the building, a written price, then fitting and testing on the agreed day.
Commercial ventilation in Denton at a glance
- Town
- Denton, Greater Manchester
- Postcode districts
- M34, SK5 and SK16
- Nearby
- Hyde (2 miles), Dukinfield (2 miles) and Droylsden (2 miles)
- Price region
- North West
- Survey
- Free survey (UK mainland)
Commercial ventilation for Denton premises
Employers must make sure every enclosed workplace is ventilated by a sufficient quantity of fresh or purified air under the Workplace (Health, Safety and Welfare) Regulations 1992. In practice, designers work to rates such as 10 litres a second per person for offices, taken from Approved Document F and CIBSE guidance, and adjust for meeting rooms, kitchens and toilets.
Demand control
CO2 or occupancy sensors that slow the system when rooms are empty.
Design and build or install-only
We design it, or install to a consultant's drawings.
Guide prices in Denton
| Work | Guide price |
|---|---|
| Small office or shop: heat recovery unit, ductwork and controls (up to about 150 m²) (per system) | £7,550–£16,100 + VAT |
| Office supply and extract ventilation with heat recovery, during a fit-out (per m² of floor) | £50–£120 + VAT |
North West rates shown. Prices exclude VAT. The fixed price is confirmed in writing after we have seen the job.
When to get it looked at
- A change of use that needs a new ventilation design
- Windows the only source of fresh air
- Old units that are noisy, inefficient or failing
Rules that apply in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). Employers have a separate duty under the Workplace Regulations 1992 to provide effective and suitable ventilation.
Questions from Denton
What area around Denton do you work in?
All of Greater Manchester. Near Denton that includes Hyde, Dukinfield, Droylsden and Ashton-under-Lyne.
How much does commercial ventilation cost?
A small office or shop with a single heat recovery unit typically costs £7,950 to £16,950 excluding VAT. Larger fit-outs are often priced at around £55 to £125 per square metre of floor, depending on design and ceiling access.
How much fresh air does an office need?
A common design rate for offices is 10 litres a second per person, used in Approved Document F and CIBSE guidance, with more for meeting rooms and areas with higher occupancy.
Do you cover Denton and nearby?
Yes. We cover Denton and nearby places including Hyde, Dukinfield, Droylsden and Ashton-under-Lyne. Send your postcode and we will confirm.
What is the price of commercial ventilation in Denton?
Guide prices for Denton use North West rates: small office or shop: heat recovery unit, ductwork and controls (up to about 150 m²) is typically £7,550 to £16,100 + VAT per system. We confirm a fixed price in writing before any work starts.
Call us to arrange a Denton survey at a time that suits your business.
Commercial ventilation near Denton
More services in Denton
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.