Commercial ventilation, Buckinghamshire
Commercial heat recovery units in Buckinghamshire
Plate and rotary heat recovery units that cut the cost of fresh air, across Buckinghamshire.
- From £7,650 + VAT per unit
- Free survey
A commercial heat recovery unit supplies fresh air and extracts stale air through a heat exchanger, so the energy already spent heating or cooling the building is passed to the incoming air instead of being thrown away. It is the standard way to ventilate offices, schools, gyms and clinics efficiently.
Across Buckinghamshire the job is priced the same way wherever you are: what is fitted, how long it takes and how far we travel. Towns we cover include Gerrards Cross, Chalfont St Peter, Milton Keynes, High Wycombe and Aylesbury.
Commercial heat recovery in Buckinghamshire at a glance
- Area
- Buckinghamshire
- Towns listed
- 13, largest Milton Keynes
- Postcode districts
- HP9, HP10, MK18, MK6, MK9 and HP11
- Price region
- South East
- Survey
- Free survey (UK mainland)
How we do it
Units use plate exchangers (no mixing of air streams) or rotary wheels (higher efficiency, small transfer of moisture). The right choice depends on the use: a gym or swimming area has very different moisture loads to an office. We size units to the building's occupancy and fresh-air needs, plan the duct connections and controls, and commission the system so the design airflows are actually achieved.
Ceiling-void units
Compact horizontal units for offices and shops.
Floor or roof units
Larger units for schools, gyms and halls.
Demand control
CO2-led control for variable occupancy.
Guide prices in Buckinghamshire
| Work | Guide price |
|---|---|
| Commercial heat recovery unit, supplied, installed and commissioned (per unit) | £7,650–£27,450 + VAT |
| Small office or shop: heat recovery unit, ductwork and controls (up to about 150 m²) (per system) | £8,750–£18,650 + VAT |
South East rates shown. Prices exclude VAT. The fixed price is confirmed in writing after we have seen the job.
Signs it is time to call us
- Extract-only systems pulling in cold air
- A gym or studio with condensation
- Classrooms with high CO2 readings
Rules in England
In England, ventilation is covered by Part F of the Building Regulations and its guidance, Approved Document F (2021 edition). Employers have a separate duty under the Workplace Regulations 1992 to provide effective and suitable ventilation.
How the job runs
- Survey
- Select
- Install
- Commission
- Hand over
Towns we cover in Buckinghamshire
- Milton Keynes
- High Wycombe
- Aylesbury
- Bletchley
- Amersham
- Chesham
- Gerrards Cross
- Chalfont St Peter
- Marlow
- Amersham on the Hill
- Newport Pagnell
- Beaconsfield
- Buckingham
Questions about commercial heat recovery units in Buckinghamshire
Which towns in Buckinghamshire do you cover?
All of Buckinghamshire, including Gerrards Cross, Chalfont St Peter, Milton Keynes, High Wycombe and Aylesbury. If your town is not listed, send the postcode and we will confirm.
Plate or rotary heat exchanger?
Plate exchangers keep the air streams completely separate; rotary wheels are usually more efficient and recover some moisture. The use of the space decides which is better.
Can heat recovery be added to an existing system?
Sometimes. Extract-only systems can often be upgraded to balanced supply and extract with a heat recovery unit.
Are prices different in Buckinghamshire?
Our guide prices are adjusted by region. In Buckinghamshire we use South East rates, so commercial heat recovery unit, supplied, installed and commissioned is typically £7,650 to £27,450 + VAT per unit.
Is the survey free in Buckinghamshire?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Buckinghamshire
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.