Commercial ventilation, Bedfordshire
Commercial heat recovery units in Bedfordshire
Plate and rotary heat recovery units that cut the cost of fresh air, across Bedfordshire.
- From £7,300 + VAT per unit
- Free survey
A commercial heat recovery unit supplies fresh air and extracts stale air through a heat exchanger, so the energy already spent heating or cooling the building is passed to the incoming air instead of being thrown away. It is the standard way to ventilate offices, schools, gyms and clinics efficiently.
Across Bedfordshire the job is priced the same way wherever you are: what is fitted, how long it takes and how far we travel. Towns we cover include Bedford, Dunstable, Leighton Buzzard, Ampthill and Kempston.
Commercial heat recovery in Bedfordshire at a glance
- Area
- Bedfordshire
- Towns listed
- 10, largest Luton
- Postcode districts
- LU2, MK40, MK41, LU4, LU5 and LU7
- Price region
- East of England
- Survey
- Free survey (UK mainland)
What the work involves
Units use plate exchangers (no mixing of air streams) or rotary wheels (higher efficiency, small transfer of moisture). The right choice depends on the use: a gym or swimming area has very different moisture loads to an office. We size units to the building's occupancy and fresh-air needs, plan the duct connections and controls, and commission the system so the design airflows are actually achieved.
Demand control
CO2-led control for variable occupancy.
Replacement of old ventilation
Extract-only systems upgraded to balanced heat recovery.
Ceiling-void units
Compact horizontal units for offices and shops.
Guide prices in Bedfordshire
| Work | Guide price |
|---|---|
| Commercial heat recovery unit, supplied, installed and commissioned (per unit) | £7,300–£26,200 + VAT |
| Small office or shop: heat recovery unit, ductwork and controls (up to about 150 m²) (per system) | £8,350–£17,800 + VAT |
These ranges use our East of England rates. Prices exclude VAT. You get a fixed written price before any work is booked.
Signs it is time to call us
- Extract-only systems pulling in cold air
- A gym or studio with condensation
- Classrooms with high CO2 readings
Rules in England
English building work follows Approved Document F (2021 edition) for ventilation rates, installation and commissioning. Workplaces must also be ventilated with a sufficient quantity of fresh or purified air under the Workplace (Health, Safety and Welfare) Regulations 1992.
How the job runs
- Survey
- Select
- Install
- Commission
- Hand over
Towns we cover in Bedfordshire
Questions about commercial heat recovery units in Bedfordshire
Which towns in Bedfordshire do you cover?
All of Bedfordshire, including Bedford, Dunstable, Leighton Buzzard, Ampthill and Kempston. If your town is not listed, send the postcode and we will confirm.
Will it reduce heating bills?
Recovering heat from extract air usually reduces the heating needed for fresh air, especially in busy buildings with long operating hours.
How noisy are they?
Units are fitted with attenuators where needed so noise in occupied rooms stays at acceptable levels.
Are prices different in Bedfordshire?
Our guide prices are adjusted by region. In Bedfordshire we use East of England rates, so commercial heat recovery unit, supplied, installed and commissioned is typically £7,300 to £26,200 + VAT per unit.
Is the survey free in Bedfordshire?
For new installations on the UK mainland, yes. The survey is free and the quote that follows is fixed and in writing. Servicing, testing and repair visits are charged, and we confirm the cost before booking.
Other services in Bedfordshire
Get a guide price in two minutes
Answer a few questions for a price range, or send photos and we will come back to you with a written quote.